Aluminum-Washers-6mm-Conical-Hardware
Anodized-Aluminum-Washer-Conical-Countersunk-Washers
Aluminum-Anodized-Conical-Countersunk-Washers

Kart Master

Aluminum Conical Washers (M6)

$2.18 USD

Shipping calculated at checkout

SKU: CW18/6-BLK
In stock
Washer Dimensions:

Washer Dimensions
Select Color:

Select Color
Quantity:
Pickup available at Canada Warehouse Usually ready in 2-4 days

Aluminum Conical Washers (M6)

M6 x 4 x 18mm / Black

Canada Warehouse

Pickup available, usually ready in 2-4 days

357 Entrepreneur Crescent
Ottawa ON K4B 1T8
Canada

+17204468860

Anodized aluminum washers - conical for flat-head allen screws. Available in a variety of colors with anodized finish. These are a great accessory to finish off your kart and color match most any chassis component or fastener!

Washer Dimensions

M6 x 18mm: Each washer is milled from aluminum and anodized in a color of your choosing. These washers are great for finishing bodywork fasteners, steering wheel hubs, or small steering and pedal components.

  • The smallest washers available here are intended for M6 conical-head screws, which typically utilize a 5mm allen key.
  • These washers are 18.0mm in outer diameter, and are pre-drilled for M6 conical-head screws.
  • The total height of the washer is 4.0mm.

M6 x 20mm: Each washer is milled from aluminum and anodized in a color of your choosing. These washers are great for finishing bodywork fasteners, steering wheel hubs, or small steering and pedal components. These are also great for front steering hardware components.
  • These washers are slightly larger in outer diameter, and are intended for M6 conical-head screws, which typically utilize a 5mm allen key.
  • These washers are 20.0mm in outer diameter, and are pre-drilled for M6 conical-head screws.
  • The total height of the washer is 4.0mm
M6 x 25mm: Each washer is milled from aluminum and anodized in a color of your choosing. These washers are great for finishing bodywork fasteners, steering wheel hubs, or small steering and pedal components. Additionally, these can work well for seat mounting washers or for rear axle support hardware or front steering hardware.
  • These washers are slightly larger in outer diameter, and are intended for M6 conical-head screws, which typically utilize a 5mm allen key.
  • These washers are 25.0mm in outer diameter, and are pre-drilled for M6 conical-head screws.
  • The total height of the washer is 4.0mm
  • NOTE: Purple Washer has been discontinued in this size.