Steering Shaft for CKR Racing Karts, as well as many CRG type kart chassis. This steering shaft is sized with an M8 thread to fit into steering shaft supports, length 510mm. This steering shaft fits all 'full-size' CKR karts, as well as many CRG-derived full-size kart chassis such as Zanardi, CRG, Maranello, DR, and more. Chrome-finished and straight and true, this steering shaft is perfect to replace a bent steering shaft, or to have a spare on hand!
With adjustable steering rate / ackerman settings, 'double-sheer' tie rod supports, and dual pre-drilled steering hub mounting holes on the shaft in place, this steering shaft is ready to install onto your CKR with little fuss.
This steering shaft is designed by CKR to primarily fit the full-line of CKR chassis from the Stingray to the Barracuda KZ. Two of the most important measurements to consider when replacing your steering shaft are the overall length of the shaft, and the threaded end size of the shaft - typically these are either M8 or M10 in size.
The FCO.00885 features an overall length of 510mm. The threaded stub at the end, which inserts into the steering shaft uniball (found in the steering shaft support on the chassis) is M8 in size.
This shaft has two (2) pre-drilled hole for your steering hub. If the height of this isn't perfect for your application, remember you can always drill your own hole upward or downward on the shaft.
Each steering shaft is sold separately.